Evaluation: Can you identify this antenna!
Subscribe via RSS Feed

Can you identify this antenna!


This is a discussion on Can you identify this antenna! within the DTV | HDTV Reception and Antenna Discussion forums, part of the Over-the-Air (Antenna TV) category.

Results 1 to 14 of 14

  1. #1
    DTVUSA Member
    Join Date
    Jul 2012
    Posts
    45

    Can you identify this antenna!

    This antenna is on top of a 39' tower. I can get the whole thing for free if I want. Is the antenna any good?antenna2.JPGantenna1.JPG


  2. #2
    Moderator

    Webmaster of Cache Free TV

    Join Date
    Feb 2010
    Location
    Logan, UT
    Posts
    2,823
    Blog Entries
    10

    Antenna: It's got some damage, but it does appear to be uhf/vhf, and it looks pretty big. I would say if you are up to refurbishing it, sure.

    Tower: a 30 foot tower is not cheap, new or used - anywhere from a few hundred $$ on up. If you have a use for it, by all means get it.

  3. #3
    DTVUSA Member
    Join Date
    Jul 2012
    Posts
    45
    Thread Starter

    thanks.....any idea what that little side antenna might be?

  4. #4
    DTVUSA Member
    Join Date
    Nov 2008
    Location
    Kettering, Ohio
    Posts
    709

    A very small VHF high band antenna?
    Avatar is from the 1967 Saturday morning Spider-man cartoon series

  5. #5
    The Graveyard Shift
    Join Date
    May 2012
    Location
    Canberra, ACT - Australia
    Posts
    724
    Blog Entries
    1

    The real question is: do you actually need that monstrosity?
    nbound-au is a qualified Antenna, Satellite, and MATV installer.

    I live in DVB-T land.


  6. #6
    DTVUSA Member
    Join Date
    Jul 2012
    Posts
    45
    Thread Starter

    Quote Originally Posted by nbound-au View Post
    The real question is: do you actually need that monstrosity?
    Have you been talking to my wife? :-). The antenna, no. I will be putting up a C5 antenna on it. The tower?.....probably not, but free is free. The higher I go, the better my pull should be. City will only let me go 35 feet though. I don't know......man thing I guess.

  7. #7
    The Graveyard Shift
    Join Date
    May 2012
    Location
    Canberra, ACT - Australia
    Posts
    724
    Blog Entries
    1

    Oh, I thought u meant the antenna, as both photos were centred on it, and the topic title is asking to identify it. Take the tower!
    Last edited by nbound-au; 08-10-2012 at 09:40 PM.
    nbound-au is a qualified Antenna, Satellite, and MATV installer.

    I live in DVB-T land.


  8. #8
    Moderator

    Webmaster of Cache Free TV

    Join Date
    Feb 2010
    Location
    Logan, UT
    Posts
    2,823
    Blog Entries
    10

    Just out of curiosity, could you post a link to your TV fool report, and if you could do 2 reports - one at 10 feet and one at 40 feet? we could give you some good advice on what to put on that tower.

    TV Fool

  9. #9
    DTVUSA Member
    Join Date
    Jul 2012
    Posts
    45
    Thread Starter

    Quote Originally Posted by MrPogi View Post
    Just out of curiosity, could you post a link to your TV fool report, and if you could do 2 reports - one at 10 feet and one at 40 feet? we could give you some good advice on what to put on that tower.

    TV Fool
    10 foot report: TV Fool
    20 foot report: TV Fool
    30 foot report: TV Fool
    40 foot report: TV Fool

  10. #10
    Moderator

    Webmaster of Cache Free TV

    Join Date
    Feb 2010
    Location
    Logan, UT
    Posts
    2,823
    Blog Entries
    10

    Nebraska. That says a lot: You need that tower. And probably those antennas, or something like them, too.

    The big multiband antenna was pointing SSW to get channel 5 (VHF-lo),11 and 13 (VHF-hi) and 19, 28 (UHF). I am assuming that smaller antenna is a VHF-hi unit pointing East for channels 8 and 10.

    Seriously, I would probably drop $150-$200 or so on a new deep fringe VHF / UHF combo antenna and a nice VHF-hi antenna - and another $50 for new coax. At 40 feet up on a tower, you want to put everything up right the first time. I would also note how the current set-up is wired before it is disassembled. It looks like there is a pre-amp there too, you may be able to re - use it. But all the coax should be replaced with good rg6 quad shield.

    You might want to go to RabbitEars.Info and see what other channels and subchannels are available.
    Last edited by MrPogi; 08-11-2012 at 01:36 PM.

  11. #11
    Moderator


    Webmaster of: Rabbit Ears

    Join Date
    May 2009
    Location
    Alexandria, VA | Age: 24
    Posts
    791

    In that area, the only UHF signal is KHNE. KTVG is off the air, probably permanently. 10 and 11 simulcast, so only one or the other is needed. The lineup is as follows:

    5-1 NBC
    5-2 This TV
    8-1 ABC
    8-2 Live Well
    10-1/11-1 CBS
    10-2/11-2 My Network TV
    13-1 ABC
    13-2 Fox
    29-1 PBS
    29-2 World
    29-3 Create

    - Trip
    N4MJC

    Comments are my own and not that of my employer or anyone else.

    RabbitEars
    TVGOS Affiliate List

    "Ignorance and prejudice and fear walk hand in hand..." - Rush "Witch Hunt"

  12. #12
    DTVUSA Member
    Join Date
    May 2012
    Location
    Lubbock, TX
    Posts
    103

    If you need both UHF and VHF AND a pre-amp, the BEST way to go is seperate antennas combined by a UHF/VHF pre-amp, excellent dedicated VHF and UHF antennas are generally about the same price as combo antennas and they work better too.

  13. #13
    Moderator
    Join Date
    May 2010
    Location
    Monument, CO
    Posts
    2,478
    Blog Entries
    2

    He has already been getting the local stations with the C5, but since he has been getting stations from long distances, I guess he wants to DX. One nice thing about Nebraska is the spectrum grabbers don't want VHF!!!
    Snappy Dan Reminds You:

    DO NOT install antennas anywhere where they could fall into overhead power lines!!! An antenna falling into power lines may result in electrical shock or death. All outdoor antennas must be grounded in accordance with the National Electrical Code (NEC). Be careful while working on roofs or towers. Always use appropriate safety precautions!!!

  14. #14
    DTVUSA Member
    Join Date
    Jul 2012
    Posts
    45
    Thread Starter

    Decided to pass on the tower. The city I live in will only allow me to go up to 35' anyway. I took down a different tower a few weeks ago, and I think I can get 30' out of it. Yes, I'll be putting my C5 up on the mast of this tower. Maybe someday down the road I'll put a rotator on it, but for now, it seems to do really good just pointed at about 245*.

 

 

Quick Reply Quick Reply


Click here to log in

Fill in the blank letter: Telev_sion (Answer this question correctly, it is used to stop spammers)

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Unable to identify the correct coax cable?
    By dbcom in forum DTV | HDTV Reception and Antenna Discussion
    Replies: 7
    Last Post: 02-25-2010, 08:55 PM
  2. Replies: 74
    Last Post: 01-02-2010, 11:56 PM
  3. Antenna Gain - Is it the ultimate measure of a better antenna?
    By Piggie in forum DTV | HDTV Reception and Antenna Discussion
    Replies: 74
    Last Post: 01-02-2010, 11:56 PM

Join DTVUSAForum

The leading television and technology community discussion site, join today!

DTV USA Forum is the best source of television
and technology troubleshooting advice from a community of experts and members.

Back to top