C band Skew Polarization control setup Help
This is a discussion on C band Skew Polarization control setup Help within the Free-to-Air (FTA) forums, part of the All Other Cable and Satellite Providers category.
I picked up a 12 foot comtech portable c band dish. It has a dual lnb feedhorn on it. I put new lnbs in it(dmx211) and I am able to pickup channels on 99w with the horizontal lnb. I cannot pickup anything on the Vertical side. This feedhorn has a motor on it and a couple sprockets that I think spins the feedhorn. I am not sure what this is for (skew?) or how to set it up. I am interested in getting some ITC channels on Cband. I have both lnbs connected to a multiswitch. The feedhorn has some debris in it. Could this affect my signal? it has some cobwebs and whatnot inside.
I would love to find a rig like this.
I think you could get the help you need here:
Poke around in the forums, you will find help there.
I took a look at G-16, and didn't see any FTA Vertical for CBand. (PTV-yes but FTA-no)
Ha, I admit that "C" is not my forte, but if you want, you can take a look at...
Galaxy 16 @ 99° West - frequencies - freq - channels - packages :: TrackSat.com
Also, IF the dish had a rotator on it to start with ??, wouldn't skew been dealt with by it.
And if it didn't, I can't imagine why you'd need to rotate the LNB's, save for setup.
Last edited by SWHouston; 05-01-2011 at 08:14 PM.