30 second skip causing problems - XFinity

#1
I have rng200n with the red button xfinity platinum remote and followed these instructions:

  • Press the “Aux” button.
  • Press and hold the “Setup” button until the Aux button blinks twice.
  • Enter code 0-1-3-7-6. You should see the Aux button blink two more times.
  • Press the Aux button again.
  • Press and hold the “Setup” button again until the Aux button blinks twice.
  • Enter code 9-9-4. You should see the Aux button blink twice.
  • Press (but don’t hold) the Setup button.
  • Enter code 0-0-1-7-3
  • Press the Cable button.
  • Press whatever button you want to be your 30 second skip button. The most commonly used is the “A Lock” button because it’ s not used and it’s close to the DVR controls anyway.
The problem is when I go to turn everything off with the "all on" button the cable box turns off then back on. I've tried a factory reset and the all-on button works correctly but as soon as I re-program the 30 second skip the problem returns.


This question, "30 second skip causing problems," is about XFinity-Comcast TV television equipment.

For other news regarding 30 second skip causing problems, and XFinity - Comcast television equipment, see our recommended stories below.
 
Top