remote control working code (Volume) for proscan plded 5069 tv - DirecTV

#1
I went thru all the numbers for proscan tv and didn't find any that will control
the volume. Does anyone have a proscan model plded 5069 with that problem
and how did you solve it (if you did)?


This question, "remote control working code (Volume) for proscan plded 5069 tv," is about DirecTV channels, programming, equipment, and sports.
 
G

Guest

Guest
#4
Proscan plded5069

THIS IS A REVISION OF THE MANUAL CODE SEARCH. IT WORKS.

1. Turn the television ON
2. Press and hold the setup button until the light turns green.
3. Enter 991 on the keypad (green light will flash)
4. Press the channel DOWN button 20 times (intermittently, not to pass the code) until the TV turns off.
5. Press the setup button to save the code.
6. Enjoy the money you saved on your new TV. Lol
 
G

Genius

Guest
#5
Solved

Follow these REVISED instructions to manually search for the code for the PROSCAN PLDED5069 and other hard to find codes for the XFinity/Contour remotes.

1. Turn the TV on.
2. Press the Setup button on the XFinity/Contour remote until the red light turns green.
3. Enter 9 9 1 using the remote's keypad. The green light will flash.
4. Press the Channel DOWN button 20* times. The TV should turn OFF when you do.
5. Press the Setup button to save the code.

Enjoy the TV you saved money on ;-)

*For other TVs it could be more or less. The idea here is you're essentially scrolling through a list of prestored codes. Instead of starting from the top using the Channel Up button, we're starting from the bottom by using the Channel DOWN button. Using this method while the TV is turned on to begin with makes it fool proof. TVs typically take longer to power up than to shut off. If one gets impatient scrolling through the seemingly infinite, invisible list of codes, they may miss the TV powering on (but, you can use channel Up and Down simultaneously if you pass it).
 

Similar threads

Top